KPM KC7 Microwave Consistency Transmitter

True-phase method measurement
The KPM KC7 transmitter uses well-tested microwave truephase technology to measure the total consistency of mixed pulps. With a microwave signal utilizing phase vector modulation that contains a microwave-wide band sweep, KC7 is able to provide the highest measurement accuracy on the market today. The antennas have been designed to avoid microwave reflections in pipe and generate a self cleaning effect.
Accurate, total consistency measurement
KPM KC7 is unaffected by variations in pulp species, fiber length, freeness and in process conditions, unlike optical and shear force technologies. KPM KC7 measures fibers and fillers for total consistency, making it ideal to measure mixed pulps and has single point calibration.
Remote display unit
Remote electronics offers large display for easy operation and set-up. Intuitive, menu-driven interface features simple set-up, calibration and troubleshooting functions.
Two versions for wide range of installation options
Flow-through version is available in sizes 50-300mm (2-12″). Insertion style KC7 fits pipe size 250mm (10”) and larger.
No maintenance
KPM KC7 needs no preventive maintenance; it has no wearing parts at all. The flow-through models do not have measurement parts inside the pipe to be hit by foreign particles. Depend on KPM KC7 for a reliable and maintenance-free product.
Sensor type
Microwave Consistency Transmitter
Output signal
3x analog outputs 4 - 20 mA + HART
Binary inputs
24 VDC, process stop, grade change (2) and sampler input
Binary output
12 – 48 VDC max 10mA, dry contact
Serial communication
USB PC-Interface, HART
Measurement range in pulp & paper process
0-16% Cs
0.001% for sizes 50 – 300 mm (3” – 12”) and insertion type (IT)
Wafer type between flanges or Sandvik NS70 mm
100 mm (4”) for all FT models
Conductivity limits
50mm (2”), 80mm (3”), 100mm (4”), 150mm (6”), 200mm (8”), 250mm (10”), 300mm (12”), Insertion Type 25mS/cm, 25mS/cm, 20mS/cm, 20mS/cm, 15mS/cm, 15mS/cm, 15mS/cm, 25mS/cm
Process temperature
0 - 100 °C (32 - 212 °F)
Process pressure
Pressure class PN25, recommendation >1,5 Bar (>22 psi), no air
Process pH
2,5 – 11,5 pH.
Ambient temperature
Sensor -20 to 60°C (-4 to 140°F), display unit -10 to 60°C (-14 to 140°F),
Flow velocity
No effect, Insertion type max flow 5m/s (16.4 ft/s)
Sensor: SS 316L; Window: Ceramic, Display: Polycarbonate
EMC, CE, PED (Directive 2014/68/EU, Article 13,1,(b) substances and mixtures
Enclosure class
Sensor IP66 (Nema 4x), display unit IP65 (Nema 4)
Power supply
86 to 264 VAC, 47 - 63Hz; 20VA